Add to Cart


Model  | Active Membrane Area ft2(m2)  | Average Permeated Flow GPD(m3/d)  | Stable Rejection Rate(%)  | Minimum Rejection Rate(%)  | 
ULP 1812-50  | 3.5(0.32)  | 50(0.19)  | 97.5  | 96  | 
ULP 1812-75  | 4.2(0.38)  | 75(0.28)  | 97.5  | 96  | 
ULP 2012-100  | 5.0(0.46)  | 100(0.38)  | 95  | 93  | 
Model  | TFC-3012-200  | TFC-3012-300  |  TFC-3012-400  | RT-3020HF  | ||||
Stable Desalination %  | 97  | 97  | 97  | 98  | ||||
Min. Desalination %  | 95  | 95  | 95  | 97  | ||||
Mean Permeable Flow GPD (L/d)  | 200 (760)  | 300 (1135)  | 400 (1512)  | 600 (2280)  | ||||
Active Film Area ft2(m2)  | 10 (1.0)  | 14 (1.4)  | 16 (1.92)  | 26 (2.4)  | ||||
Pressure  | 65psi (0.45Mpa)  | 150psi (1.03Mpa)  | ||||||
Water Temp.  | 25℃  | |||||||
Concentration(NaCl)  | 500ppm  | |||||||
Water PH  | 6.5 to 7.5  | |||||||
Recovery Rate %  | 15  | |||||||
Max. Operating Pressure  | 300psi(2.07Mpa)  | 500psi(3.45Mpa)  | ||||||
Max. Feed Water Temp.  | 45℃  | |||||||
Max. Feed Water Silt Density Index (SDI)  | 5  | |||||||
Feed Water Chlorine Tolerance  | < 0.1ppm  | |||||||
Feed Water PH Range, Continuous Operation  | 3 to 10  | |||||||
Feed Water PH Range, Short-Term Cleaning  | 2 to 12  | |||||||
Max. Pressure Drop of Single Membrane  | 10psi (0.07Mpa)  | |||||||
1. Permeate flow rate and salt rejection is based on testing conditions: 250C, pH 7.5, 20% recovery.91.   | ||||||||
2. Stabilized salt rejection is generally achieved within 24-48 hours of continuous use, depending upon feedwater characteristics and operating conditions.  | ||||||||
3. Active area guaranteed +/- 3%  | ||||||||









